| PART |
Description |
Maker |
| 86094328324H45E1LF 86093488324H45000E1 86094328314 |
DIN STANDARD RECEPTACLE(STRAIGHT SPILL DIN 41612 STYLE-C/2) DIN标准插座（直溢出依据DIN 41612风格C / 2号）
|
Glenair, Inc.
TE Connectivity, Ltd.
|
| MCP41010MCP42010 MCP41050-I/P MCP41050-E/SN MCP410 |
Single/Dual Digital Potentiometer with SPI?/a> Interface
Single/Dual Digital Potentiometer with SPIInterface 双数字电位器接口与SPI
The MCP42100 digital potentiometer features two independent channels, 8-bit resolution (256 wiper steps), and an industry-standard ...
The MCP42010 digital potentiometer features two independent channels, 8-bit resolution (256 wiper steps), and an industry-standard ...
The MCP41100 single-channel digital potentiometer features 8-bit resolution (256 wiper steps), and an industry-standard SPI™ ...
The MCP41010 single-channel digital potentiometer features 8-bit resolution (256 wiper steps), and an industry-standard SPI™ ...
The MCP42100 digital potentiometer features two independent channels, 8-bit resolution (256 wiper steps), and an industry-standard SPI™ serial interface. The wiper position varies linearly and is controlled via the SPI interface. The
The MCP42050 digital potentiometer features two independent channels, 8-bit resolution (256 wiper steps), and an industry-standard SPI™ serial interface. The wiper position varies linearly and is controlled via the SPI interface. The
The MCP42010 digital potentiometer features two independent channels, 8-bit resolution (256 wiper steps), and an industry-standard SPI™ serial interface. The wiper position varies linearly and is controlled via the SPI interface. The
The MCP41100 single-channel digital potentiometer features 8-bit resolution (256 wiper steps), and an industry-standard SPI™ serial interface. The wiper position varies linearly and is controlled via the SPI interface. The MCP41100 ha
The MCP41050 single-channel digital potentiometer features 8-bit resolution (256 wiper steps), and an industry-standard SPI™ serial interface. The wiper position varies linearly and is controlled via the SPI interface. The MCP41050 ha
The MCP41010 single-channel digital potentiometer features 8-bit resolution (256 wiper steps), and an industry-standard SPI™ serial interface. The wiper position varies linearly and is controlled via the SPI interface. The MCP41010 ha
400000 SYSTEM GATE 2.5 VOLT FPGA - NOT RECOMMENDED for NEW DESIGN
The MCP42050 digital potentiometer features two independent channels, 8-bit resolution (256 wiper steps), and an industry-standard ...
The MCP41050 single-channel digital potentiometer features 8-bit resolution (256 wiper steps), and an industry-standard SPI™ ...
IC,DIGITAL POTENTIOMETER,CMOS,DIP,8PIN,PLASTIC
Single/Dual Digital Potentiometer with SPI Interface
Single/Dual Digital Potentiometer with SPI?/a> Interface
Single/Dual Digital Potentiometer with SPI?Interface
|
Microchip Technology, Inc.
Microchip Technology Inc.
|
| HOA6961P51 HOA6962P55 HOA6965P55 HOA6960P51 HOA696 |
Compliant to DIN standard, Compliant to IEC603-2/DIN41612 standard; HRS No: 583-0137-3 77
|
Integrated Device Technology, Inc.
|
| DIN-48FS-S33-A1C1 DIN-48MR-S33-A1C1 |
DIN 41612 CONNECTORS STANDARD TYPE 1/2 C
|
Adam Technologies, Inc.
|
| PPS-CLASSIC-M |
Profile cutter, for cutting and stamping holes in standard DIN rails
|
PHOENIX CONTACT
|
| 86093167313785ELF 8609XXX7313XX5 86094327313765ELF |
DIN STANDARD HEADER(ANGLED SPILL DIN41612 STYLE-C/2) DIN标准头（直角溢出DIN41612风格的C / 2号）
|
Sanyo Denki Co., Ltd.
TE Connectivity, Ltd.
|
| 0901700016 90170-0016 |
2.54mm (.100) Pitch QF-50?? Strain Relief, DIN 41651, Standard Low Profile, 16 Circuits
2.54mm (.100) Pitch QF-50? Strain Relief, DIN 41651, Standard Low Profile, 16 Circuits
|
Molex Electronics Ltd.
|
| MCP2510T-E/SO MCP2510-I/ST MCP2510T-I/SO MCP2510T- |
The MCP2510 18-pin stand-alone CAN (Control Area Network) controller features an industry standard SPI serial interface, enabling ...
The MCP2510 18-pin stand-alone CAN (Control Area Network) controller features an industry standard SPI serial interface, enabling an easy connection to virtually any microcontroller. The MCP2510 provides immediate CAN support across the en
|
Microchip
|
| M25PE80 M25PE80-VMN6G M25PE80-VMN6P M25PE80-VMN6TG |
8-Mbit, page-erasable serial flash memory with byte alterability, 75 MHz SPI bus, standard pinout
|
Numonyx B.V
|
| M25PE10 M25PE10-VMN6G M25PE10-VMN6P M25PE10-VMN6TG |
1 and 2 Mbit, page-erasable serial Flash memories with byte alterability, 75 MHz SPI bus, standard pinout
|
Numonyx B.V
|
